TCAR-32 Co2 Tire Repair Kit Bag

Co2 Tire Repair Kit Bag
Specification:
Nylon Co2 repair kit bag/pc
Co2 cylinder 16g/2pcs
Rubber Solution 7ml/pc
Screwdriver handle rasp tool/pc
Screwdriver handle open eye tool/pc
Tire seal 4”(10cm)/5strips
Co2 connection pipe/pc
Plastic adapter/pc
Diagonal pliers/pc
Packing:
20 bags/ CTN.
N.W.: 7.6kgs
G.W.: 8.6kgs



1.

Before set up, make sure the switch is in the “closed” position, place the adapter on the inflator.
2.

Smaller hole attach CO2 at the bottom in clockwise direction.
3.

Attach the pipe to the tire and turn the inflator clockwise to insert air into tires with CO2 cylinder.

1.

Pull out the nail from tire.
2.

Clean the injury with the open end inserting tool.Following the direction of the injury and twist .
3.

Times in hole inside.
4.

Feed the seal string to open end inserting tool. Also using a little of solution on the surface of seal string.
5.

Insert the tool by hand into injury through the tire from outside to inside about 1 cm. Then twist it.
Put out the tool directly.