TCAR-67 Tire Repair Kit for Car ＆ Moto

Tire Repair Kit for Car & Moto
Card packing/ sets
Specification:
Co2 cylinder 16g/ 2pcs
Co2 cylinder cover/ 1pc
Rubber Solution 7ml/ 1pc
T-handle tire plug tool/ 1pc
T-handle screw drill/ 1pc
Tire seal 10cm x 5strips (4″)/ 1pc
Co2 connection pipe/ 1pc
Plastic adapter/ 1pc
Small knife/ 1pc
Packing:
12 cards/ Inner box
6 Inner boxes/ CTN.
CUFT: 2.6’
N.W.: 17kgs
G.W.: 18kgs



1.

Before set up, make sure the switch is in the “closed” position, place the adapter on the inflator.
2.

Smaller hole attach CO2 at the bottom in clockwise direction.
3.

Attach the pipe to the tire and turn the inflator clockwise to insert air into tires with CO2 cylinder.

1.

Pull out the nail from tire.
2.

Clean the injury with the open end inserting tool.Following the direction of the injury and twist.
3.

Times in hole inside.
4.

Feed the seal string to open end inserting tool. Also using a little of solution on the surface of seal string.
5.

Insert the tool by hand into injury through the tire from outside to inside about 1 cm. Then twist it.
Put out the tool directly.